Overview:

The Viper™ ultra-wideband video routing switcher is the premieremid-sized router for critical video environments. Viper is a modular,feature-rich routing switcher that provides up to 5 channels of RGBHVvideo in single-channel 4RU frame. Viper is designed to accommodatesystem growth and on-site expansion. Frames are expandable by 8 inputand/or 8 output increments - up to 64x64 of a single channel in eachframe.

• Hot-swappable video boards accessible via front panel forfield service or reconfiguration
• Hot-swappable power supplies for maximum in-service timeand minimal interruptions
• Redundant processors and power supplies (optional)
• TCP/IP port for IP (Ethernet) control via Mac or PC
• RS-232/422 serial interface supported by all major thirdparty control systems
• Reliability and longevity of time-tested Sierra Videodesign
• Full range of Sierra Video control hardware and softwarecomponents, including remote control panels and serial control
• GPI/GPO alarms for power supply and for health monitoring
  
  
  TypicalConfigurations :

  Ponderosa is expandable by 8 input and/or 8 outputincrements up to 64x64 in a 4RU frame.

  Viper 6464V5 - 5-channel (RGBHV) 5 frames 20RU
  Viper 6464V4 - 4-channel (RGBS) 4 frames 16RU
  Viper 6464V3 - 3-channel (RGB/YUV) 3 frames 12RU
  Viper 6464V2 - 2-channel (Y/C) 2 frames 8RU
  
  Viper 6464V5 - 64 x 64 five-channel, 500MHz RGBHV
  Viper 6464V5 - 64 x 64 five-channel, 500MHz RGBHV
  Viper 6464V5 - 64 x 64 five-channel, 500MHz RGBHV
  Viper 6464V5 - 64 x 64 five-channel, 500MHz RGBHV

  
  
  PerformanceSpecifications:

  Wideband Video Specifications

  Bandwidth: 500MHz +/-3dB fully loaded
  Video Gain: Unity
  Crosstalk: -80dB @ 1MHz
  Switching Speed: Deterministic

  INPUT
  Video Level: 0.03V p-p to 2.5V p-p
  Impedance: 75 Ohms
  Return Loss: < -30dB @ 5MHz
  Connector Type: BNC

  OUTPUT
  Video Level: 0V to 2.5V p-p
  Impedance: 75 Ohms
  Return Loss: -30dB @ 5MHz
  Connector Type: BNC

  Control Specifications

  Serial: 3 general purpose 9 pin-D, eachswitchable RS-232 or RS-422 9600, 38400, 115200 baud
  Protocols: SVS host, simple Kramer andselect others
  Ethernet: 10/100 Base-T, full duplex, RJ-45connector
  Protocols: ARP, ICMP, TCP/IP, Telnet, HTTP
  Web Server: For configuration and control
  Redundant Control Processor: Optional
  Control Panels: Supports full line of SCPremote control panels
  Legacy SVS Product Control: 25 pin-Dexpansion port, up to 8 additional signal levels
  GPI/GPO: 5 inputs/5 outputs

  General Specifications

  Rack Unit/Frame Size: 4RU per signal(20RU for RGBHV system)
  Dimensions: 19”w x 7”h x 20 3/8”d, mounts instandard 19” rack, depth measurements do not include front panelhardware or rear cabling
  Power: 90 VAC -> 240 VAC 50/60Hz (<150Watts) auto-detecting
  Redundant Power Supply: Optional
  Storage Temperature: -40° to +150° F
  Operating Temperature: 30° to 100° Fambient
  Humidity: 10% to 90% non-condensing