Overview:

A separate 1RU serial control processor frameis required. The frame has two slots for redundant processor configurations (optional), and comes with two power supplies standardand rear I/O communication connectors. The module will provide allserial control for both internal and external serial control. All internal router control is via RS-232/422 communication managed by the system controller.

Features:

• Digital and analog configuration in compact 7RU frame
• Expand by 32x32 crosspoint modules
• Host 64x64 analog & 64x64 digital video in one frame
• Compatibility with Lassen, Sierra Pro XL, Tahoe, Shasta,Yosemite routing switchers
• RS-232 serial interface uses common 3-port SVS serial protocol
• Hot-swappable & redundant power supplies
• Mix and match signals
• Redundant control processors available

Performance Specifications:

Serial Digital Video

Data rates: 143, 177, 270, and 360 Mbps perSMPTE-259 M-A,B,C,D
Data types: 8 or 10-bit serial digital video
Jitter: 500 ps p-p worst case

Input
Video Level: 1V p-p
Return Loss: 15dB @ 270 Mbps
Cable Equalization Range: automatic up to 300meters for 143, 177 and 270 Mbps, 200 meters for 360 Mbps
Impedance: 75 Ohm
Connector Type: 75 Ohm BNC

Output
Video Level: 800mV p-p +/-10%
Return Loss: 13dB @ 270 Mbps
Connector Type: 75 Ohm BNC

Wideband Video

Bandwidth: +/-0.2dB to 5MHz, +0dB/-3dB 5MHzto 50MHz
Video Gain: Unity (+/-2dB adjustable)
Crosstalk: 45dB to 50MHz - adjacent hostile
Switching Speed: deterministic

Input
Video Level: 1V p-p
Impedance: 75 Ohm nominal
Return Loss: 40dB @ 5MHz
Connector Type: BNC

Output
Video Level: 1V p-p nominal
Impedance: 75 Ohm nominal
Return Loss: 40dB @ 5MHz
Connector Type: BNC

Analog Video

Video Gain: Unity (+/-2dB adjustable)
Crosstalk: >60dB @ 5MHz
Switching Speed: deterministic

Input
Video Level: 1V p-p
Impedance: 75 Ohm nominal
Return Loss: 40dB @ 5MHz
Connector Type: BNC

Output
Video Level: 1V p-p nominal
Impedance: 75 Ohm nominal
Return Loss: 35dB @ 5MHz
Connector Type: BNC

Control Ports

Control Panel Port (Port 1) RS-485
Total Number of Panels Supported: Up to 100
Cable Type: 2-wire shielded (Belden 8451 or equivalent
Maximum Cable Length: 5,000 ft. (1,500 m)

Terminal Port (Port 2) RS-232C (RS-422 optional)
Data Rates: 1.2Kbps, 2.4Kbps, 9.6Kbps, or19.2Kbps

Host Port (Port 3) RS-232C
Data Rates: 1.2Kbps, 9.6Kbps, 38.4Kbps, or115.2Kbps

Mechanical & Operational Characteristics

Frame Height: 7 RU (12.25”)
Frame Depth: 16” (41 cm)
Operating Temperature: Range 0 - 40 degrees C
Input Voltage: 115 VAC or 230 VAC +/-10%(switch selectable)
Power Requirements: 80 - 400 VA per routerframe
Humidity: 10% to 90 % non-condensing

Control

Serial: 2 General Purpose 9 pin-D, eachswitchable RS-232 or RS-422, 9600, 38400, 115200 baud
Serial Protocols: SVS host, simple Kramer,and select others
Ethernet: N/A
Redundant Control Processor: Optional
Control Panels: Supports SCP programmablecontrol panels, XY & single bus control panels

General

Rack Unit Size/Frame
Video Frame: 7RU
CPU & Protocol Translator Frames: 1RU

Dimensions
Video Frame: 19” w x 12.25” h x 19” d
CPU & Protocol Translator Frames: 19” w x1.75” h x 19” d
Mounts in standard 19” rack
Depth measurements do not include front panel hardware or rear cabling