A2D Solutions : Routers & Switchers : Sierra Video Routers & Switchers : Sierra Video Sequola

128 x 128 Multi-Format Matrix Routing Switcher

Overview:

The Sequoia family is made up of 7RU, 8 slotframes that can be populated in a variety of ways, depending upon yourneeds. For larger systems (up to 512x512) we simply add frames toaccommodate the board set required. For example, a 128x128 SDI routerwill fill one frame. Additional frames will be required for largermatrices.

Features:

Digital and analog configuration in compact 7RU frame
Expand by 32x32 crosspoint modules
Host 64x64 analog & 64x64 digital video in one frame
Compatibility with Lassen, Sierra Pro XL, Tahoe, Shasta,Yosemite routing switchers
RS-232 serial interface uses common 3-port SVS serialprotocol
Hot-swappable & redundant power supplies
Mix and match signals
Redundant control processors available

PopularConfigurations :

Sequoia matrix routing switchers canbe configured to any combination of 32 in and 32 out.

Sequoia 3232V - 32 x 32 analogvideo routing switcher
Sequoia 3232D - 32 x 32 HD-SDI/SDI
Sequoia 6464V - 64 x 64 digital video routing switcher
Sequoia 512512V - 512 x 512 analog video routing switcher

PerformanceSpecifications:

Serial Digital Video

Data rates: 143,177, 270, and 360 Mbps per SMPTE-259 M-A,B,C,D
Data types: 8 or 10-bit serial digital video
Jitter: 500 ps p-p worst case

Input
Video Level: 1V p-p
Return Loss: 15dB @ 270 Mbps
Cable Equalization Range: automatic up to 300meters for 143, 177 and 270 Mbps, 200 meters for 360 Mbps
Impedance: 75 Ohm
Connector Type: 75 Ohm BNC

Output
Video Level: 800mV p-p +/-10%
Return Loss: 13dB @ 270 Mbps
Connector Type: 75 Ohm BNC

Wideband Video

Bandwidth: +/-0.2dBto 5MHz, +0dB/-3dB 5MHz to 50MHz
Video Gain: Unity (+/-2dB adjustable)
Crosstalk: 45dB to 50MHz - adjacent hostile
Switching Speed: deterministic

Input
Video Level: 1V p-p
Impedance: 75 Ohm nominal
Return Loss: 40dB @ 5MHz
Connector Type: BNC

Output
Video Level: 1V p-p nominal
Impedance: 75 Ohm nominal
Return Loss: 40dB @ 5MHz
Connector Type: BNC

Analog Video

Video Gain: Unity(+/-2dB adjustable)
Crosstalk: >60dB @ 5MHz
Switching Speed: deterministic

Input
Video Level: 1V p-p
Impedance: 75 Ohm nominal
Return Loss: 40dB @ 5MHz
Connector Type: BNC

Output
Video Level: 1V p-p nominal
Impedance: 75 Ohm nominal
Return Loss: 35dB @ 5MHz
Connector Type: BNC

Control Ports

Control Panel Port (Port 1)RS-485
Total Number of Panels Supported: Up to 100
Cable Type: 2-wire shielded (Belden 8451 orequivalent
Maximum Cable Length: 5,000 ft. (1,500 m)

Terminal Port (Port 2) RS-232C(RS-422 optional)
Data Rates: 1.2Kbps, 2.4Kbps, 9.6Kbps, or19.2Kbps

Host Port (Port 3) RS-232C
Data Rates: 1.2Kbps, 9.6Kbps, 38.4Kbps, or115.2Kbps

Mechanical & OperationalCharacteristics

Frame Height: 7 RU(12.25”)
Frame Depth: 16” (41 cm)
Operating Temperature: Range 0 - 40 degrees C
Input Voltage: 115 VAC or 230 VAC +/-10% (switchselectable)
Power Requirements: 80 - 400 VA per router frame
Humidity: 10% to 90 % non-condensing

Control

Serial: 2 GeneralPurpose 9 pin-D, each switchable RS-232 or RS-422, 9600, 38400, 115200baud
Serial Protocols: SVS host, simple Kramer, andselect others
Ethernet: N/A
Redundant Control Processor: Optional
Control Panels: Supports SCP programmablecontrol panels, XY & single bus control panels

General

Rack Unit Size/Frame
Video Frame: 7RU
CPU & Protocol Translator Frames: 1RU

Dimensions
Video Frame: 19” w x 12.25” h x 19” d
CPU & Protocol Translator Frames: 19” w x1.75” h x 19” d
Mounts in standard 19” rack
Depth measurements do not include front panel hardware or rear cabling