Interface & Distribution

HD/SD Upconverter/Frame Synchronizer/ARC

The XVP-811i-UC is a highly integrated module designed to synchronize, Upconvert and process SD signals into HD/SD hybrid plants. The XVP-811i-UC will provide SD and HD outputs simultaneously. Each output path provides the format, color space and aspect ratio conversion necessary to maintain a constant signal format at each of the two outputs. Format conversion adjusts automatically if the input is switched. The XVP-811i-UC is ideal for processing incoming satellite feeds in broadcast facilities, and for processing incoming lines for mobile production trucks. The XVP-811i-UC´s dual inputs can be used to switch between SD sources. Alternatively, an upstream router can be used to select sources, and the second input can be used to connect a backup source which will be automatically selected when the main source fails. The XVP-811i-UC can process up to 16 channels (4 groups of embedded audio) or, if discrete AES inputs/outputs are required, the XVP-811i-UC can be combined with the DAP-781i audio processing module. The XVP-811i-UC can be upgraded in the field to the full XVP-811i functionality at any time. *The XVP-801i-UC has been replaced by the XVP-811i-UC*

FEATURES
Built-in framesync, proc amp and upconversion Dual SD inputs Simultaneous,independent HD and SD outputs HD output can be1080i50, 1080i59.94, 720p50 or 720p59.94 SD output can be480i (525/59.94) or 576i (625/50) Up to 16 channelsof embedded audio processing Independent HDand SD 16 channel audio embedders	Compatible withMiranda external audio processor modules Flexible HD/SDreference input Autofailover/change over to second input Independentaspect ratio converters Processes andconverts Ancillary data such as CC (608 /708) and time code Audio downmixfrom 5.1 to 2.0 Lt Rt/stereo Dolby™ Metadatainsertion in HD-SDI signal

SPECIFICATIONS

VIDEO INPUTS (2) SIGNAL: SMPTE 292M (1.485, 1.485/1.001Gbps) SUPPORTED FORMATS: SD: 480i59.94,576i50 CABLE LENGTH: 275 m (900’) Belden 8281at 270 Mbps RETURN LOSS: >15 dB up to 270 MHz SD VIDEO OUTPUT SIGNAL (2): SMPTE 259-C (270 Mbps) SUPPORTED FORMATS: SD: 480i59.94,576i50; 4:3 or 16:9 Anamorphic RETURN LOSS: >15 dB up to 270 MHz JITTER: < 0.2UI as per SMPTE-259M HD VIDEO OUTPUT SIGNAL (2): SMPTE 292M (1.485,1.485/1.001 Gbps) SUPPORTED FORMATS: HD: SMPTE274M: 1080i59.94, 1080i50 HD: SMPTE296M: 720p59.94, 720p50 RETURN LOSS: >15 dB up to 1.5 GHz JITTER: < 0.2 UI as per SMPTE 292M REFERENCE INPUT SIGNAL (1): SMPTE 170M/SMPTE 318M/ITU624-4/BUT 470-6 or Comp.Sync SMPTE 274M / SMPTE 296M Tri-Level Sync RETURN LOSS: >35 dB up to 5.75 MHz

GPI (6) CONNECTOR: RJ-69 (RJ-45 10-pin contacts)providing 4 user preset recalls and 2 input select Opto-isolated,contact closure to ground VIDEO PROCESSING PERFORMANCE SIGNAL PATH: 10 bits PROCESSING DELAY: 1 frame minimum, 4frames maximum ADDITIONAL FIXED DELAY: Up to 3 frames AUDIO PROCESSING PERFORMANCE (OPTIONAL) QUANTIZATION: 20-24 bits SAMPLING: 48 kHz, synchronous CHANNELS: 16, 8 pairs, 4 Groups OTHER TEST PATTERN GENERATOR: Color bars 100%white With 75% bars TEST TONE GENERATOR: -18 dBFs, 24 bit,1kHz continuous tone on right channel with pulsed tone on left channelin every pair. POWER: 10 W

ORDERING INFO

XVP-811i-UC XVP configured as HD Upconverter Housing Frames: Symphonie, Quartet 2 Rear Modules: Symphonie-R-HDM OPTIONS XVP-811-OPT-AUD16 Internal 16 ch. Embedded AudioProcessing Option XVP-811i-UG-UC2XVP Upgrade from XVP-811i-UC to full XVP REMOTE CONTROL: iControl Remote Control and Monitoring iControl Solo Stand-alone Remote Control Software RCP-100 Remote Control Panel