A2D Solutions : Distribution & Terminal : Miranda Interface & Distribution : Miranda ADX-1842 / 1852

Miranda ADX-1842 / 1852

Interface & Distribution

4 AES HD/SD De-embedder

The ADX-1842 is a high-quality de-embedder designed to extract up to four AES 24-bit 48kHz digital audio signals from a single HD/SD serial digital video signal. A unique feature is its ability to extract time code, a serial RS-422 data signal and two GPI status signals from the video signal. The module supports signal presence detection, remote reporting, and local or remote configuration and control, and features a built-in audio tone test signal. The ADX-1852 has all of the features of the ADX-1842, excluding the HD/SD-SDI loop through outputs, and it provides an analog audio monitor output for one selectable stereo pair of signals.

FEATURES
HD-SDI or SDIinput Auto EQ for up to110/250m Automaticdetection of video input format Two pass throughHD-SDI/SDI video outputs 110? balanced or75? unbalanced input Selectable audiodelay of up to 3 frames 24-bit digitalaudio deembedding Audio silenceoutput on loss of video input Left/rightchannels swappable	Selectablerouting of AES Co-phased audiooutputs Dolby-Ecompatible MSB compliant Monitor outputfor non-PCM signals LTC outputtranslated from ATC data or DVITC RS422 serial dataoutput Two opto-isolatedGPI outputs

SPECIFICATIONS
VIDEO INPUT VIDEO SIGNAL: HD/SD-SDI SMPTE 292M/SMPTE259M (see list of supported formats below) Embedded audio as per SMPTE299M/SMPTE 272M Embedded ATC/DVITC as per SMPTE RP 188/SMPTE 266MEmbedded RS-422 & GPI as per SMPTE 291M (with proprietary Type-1DID) CABLE LENGTH: up to 110m/250m of Belden1694A RETURN LOSS: >15 dB, 5 MHz to 1.5GHz/270MHz AUDIO AES-3ID OUTPUT SIGNAL: AES-3id (SMPTE 276M) LEVEL: 1.0 Vp-p ±10% IMPEDANCE: 75 ? unbalanced AUDIO AES3 OUTPUT SIGNAL: AES3 LEVEL: 3.0 Vp-p ±10% IMPEDANCE: 110 ? balanced ANALOG AUDIO OUTPUT (ADX-1851 ONLY) QUANTIZING: 24 bits LEVEL, 0 DBFS: +18 dBu, ±6dB (1dBsteps) IMPEDANCE: 50? SNR: >92 dB (A weighting) THD: <0,01% DYNAMIC RANGE: >92 dB CROSSTALK: <90 dB (20 Hz to 20 kHz) AUDIO AES SIGNAL SAMPLING RATE: 48kHz synchronous LTC SIGNAL OUTPUT	SIGNAL: Reconstructed LTC from ATC/DVITC IMPEDANCE: < 5: Nsource, unbalanced 1kÙ load LEVEL: 1.0 Vp-p RS-422 SIGNAL OUTPUT SIGNAL: RS-422 RATE: Reconstruction of signal input toembedder (38,400 or 115,200 bauds) GPI SIGNAL OUTPUT (2) SIGNAL: Opto-isolated, common emitter FORWARD VOLTAGE: 30V max REVERSE VOLTAGE: 5V max RATE: DC- to 250 Hz VIDEO OUTPUT (INPUT ACTIVE LOOP-THROUGH) VIDEO SIGNAL: HD/SD-SDI SMPTE 292M/SMPTE259M RETURN LOSS: >15 dB up to 1.5GHz/270MHz dB WIDEBAND JITTER: < 0.2 UI p-p PROCESSING PERFORMANCE SIGNAL PATH: 10-bit video / 24-bit audio AUDIO PROCESSING DELAY: 875 µs(combined embedding and extraction¹) AUDIO DELAY: Up to 3 video frames (1/2frame steps) ATC/DVITC DELAY: None, 1, 2,or 3 framesbefore translation to LTC RS-422 PROCESSING DELAY: 500 µsmax. (combined embedding and extraction¹) GPI PROCESSING DELAY: 4 video lines(combined embedding and extraction¹) TEST SIGNALS: AUDIO: 1 kHz tone (R steady, L pulsed) -18dBFS (EBU R49, R68) LTC: 10 second loop starting at 23:59:00:00 POWER: 9.5 W ¹Note: Applicable tocombinations of this card and AMX-1842/1852

ORDERING INFO

ADX-1842 4 AES HD/SD De-embedder

Choose one of the following rear connector panels:

ADX-1842-75-DRP Double Rear ConnectorPanel (75 Ohms)
ADX-1842-110-DRP Double Rear ConnectorPanel (110 Ohms)

ADX-1852 HD AES De-embedder w/Analog Audio Monitor

Choose one of the following rear connector panels:

ADX-1852-75-DRP Double Rear ConnectorPanel (75 Ohms)
ADX-1852-110-DRP Double Rear ConnectorPanel (110 Ohms)

Housing:

Densité 2

Remote Control:

iControl Remote Control and Monitoring
iControl Solo Stand-alone RemoteControl Software
RCP-100 Remote Control Panel

Miranda ADX-1842 / 1852 Interface & Distribution
	Item#
	ADX-1842	CALL	0.00
	ADX-1852	CALL	0.00
Miranda ADX-1842