| HD/SD Fiber Optic InterfacesFIO-1811 / 1821-13 / 1831-13 / 1841 / 1851-13 The FIO-18x1 series is a flexible serial digital video-to-fiber and fiber-to-video module for the Densité frame. The FIO-18x1 is designed for SD and HD serial video as well as compressed bit-streams. The series supports any data rate in the range 5 Mbps to 1.5 Gbps and provides a reclocked serial digital video from 143 Mbps to 1.5 Gbps. The FIO-18x1 series offers 5 different configurations. Depending on how it is configured, the FIO-18x1 can provide single or dual fiber Tx, single or dual fiber Rx or bidirectional fiber Rx/Tx. The FIO-18x1 can be installed in the same chassis as a series of interface modules, providing a wide variety of video, audio and data conversion and multiplexing functions.(MSB compliant, SD only) | FEATURES |
- Supports anyserial data rate from 5 Mbps to 1.5 Gbps (HD-SDI)
- Reclocked serialdigital video from 143 Mbps to 1.5Gbps
- Supports SMPTE292M, SMPTE 259M, SMPTE 297M, SMPTE310M, DVB-ASI
- Providesunidirectional or bidirectional interface between serial digital andfiber optic
- Single or dualTX, RX or combined RX/TX configurations with optional WDM
- Single-mode 1310nm and 1550 nm transmitter
- Convenient frontloading design
|
- Fully hotswappable
- Optical andelectrical signal presence detection
- Supports remotelaser cut-off
- Remote monitoringand control
- Ideal for longvideo run with “Hum” immunity
- Provides outputto Monitoring Switching Bridge option (SD only)
|
| SPECIFICATIONS |
MECHANICAL
I/O CONNECTORS: 75 ? BNC (2) Optical SC(2)
OPTICAL RECEIVER
SIGNAL COMPATIBILITY: 5 Mbps to 1.5 GbpsSMPTE 259M (143-360 Mbps) SMPTE 292M (1.485 Gbps) SMPTE 297M (Fiber)SMPTE 305M (SDTI) SMPTE 310M (19.4 Mbps) DVB-ASI (270 Mbps)
WAVELENGHT: 1310 nm to 1550 nm SENSITIVITY: -20 dBm FIBER TYPE: Single Mode
OPTICAL TRANSMITTER
SIGNAL COMPATIBILITY: 5 Mbps to 1.5 MbpsSMPTE 259M (143-540 Mbps) SMPTE 292M (1.485 Gbps) SMPTE 297M (Fiber)SMPTE 305M (SDTI) SMPTE 310 (19.4 Mbps) DVB-ASI (270 Mbps)
|
WAVELENGHT: 1310 nm or 1550nm OUTPUT POWER: -7.5 dBm (Laser Diode) FIBER TYPE: Single Mode
VIDEO INPUT
SIGNAL: SMPTE 292M (1.485, 1.485/1.001Gbps) SMPTE 259M-ABCD (143, 270, 360 Mbps) SMPTE 305M (SDTI) SMPTE 310M(19.4 Mbps) DVB-ASI (270 Mbps) Supports proposed 540 Mbps standard
RCLK SIGNAL: 143, 270, 360, 540 Mbps and1.5 Gbps CABLE LENGTH: 100 m (350’) at 1.485 Gbps(Belden 1694A) RETURN LOSS: > 15 dB up to 1.5 GHz
VIDEO OUTPUT
SIGNAL: SMPTE 292M (1.485, 1.485/1.001Gbps) SMPTE 259M-ABCD (143, 270, 360 Mbps) SMPTE 305M (SDTI) SMPTE 310M(19.4 Mbps) DVB-ASI (270 Mbps) Supports proposed 540 Mbps standard
RCLK SIGNAL: 143, 270, 360, 540 Mbps and1.5 Gbps RETURN LOSS: > 15 dB up to 1.5 GHz JITTER: < 0.2 UI p-p
|
| ORDERING INFO | FIO-1811 Single Optical to Electrical Converter (Rx)FIO-1821-13 Single Electrical to Optical Converter (Tx1310 nm) FIO-1831-13-(W¹) Electrical to Optical and Opticalto Electrical Converters (Rx + Tx 1310 nm with optional WDM) FIO-1831-15-(W¹) Electrical to Optical and Optical toElectrical Converters (Rx + Tx 1550 nm with optional WDM)FIO-1841-(W¹) Dual Optical to Electrical Converter(2 x Rx with optional WDM) FIO-1851-13-13 Dual Electrical to Optical Converter (2x Tx 1310 nm) FIO-1851-13-15-(W¹) Dual Electrical to OpticalConverter (Tx 1310 nm + Tx 1550 nm with optional WDM)Rear panels: - FIO-1811-SRP Single Rear ConnectorPanel for FIO-1811
- FIO-1821-13-SRP Single Rear ConnectorPanel for FIO-1821-13
- FIO-1831-13-(W¹)-SRP Single RearConnector Panel for FIO-1831-13-(W¹)
- FIO-1831-15-(W¹)-SRP Single RearConnector Panel for FIO-1831-15-(W¹)
- FIO-1841-(W¹)-SRP Single RearConnector Panel for FIO-1841-(W¹)
- FIO-1851-13-13-SRP Single RearConnector Panel for FIO-1851-13-13
- FIO-1851-13-15-(W¹)-SRP SingleRear Connector Panel for FIO-1851-13-15-(W¹)
¹ Include W for WDM option, otherwise leave blankHousing Frame: Remote Control: - iControl Remote Control and Monitoring
- RCP-100 Remote Control Panel
|
|