Miranda HCO-1821

The HCO-1821 is a 2 x 1 HD/SD/ASI change over which supports 16 channels of embedded audio and Metadata. Change overs are performed electronically by the HCO-1821’s internal router. The module can perform a video and audio “Clean & Silent Switch” betweensources using the CS option. In the event of a power failure, the signal is protected by relays fitted on the rear module, maintaining the integrity of the selected signal at the output. Relays are fully controllable via the GPI interface.Input selection can be performed automatically or manually. In automatic mode, the card will perform input selection based on internal signal analysis with alarm parameters, and the status of the inputs. In manual mode, channel selection can be undertaken from the DensitéController, the iControl software, or simply by using a GPI. A GPI can be connected to an automation system or any simple GPI control panel. The GPI outputs give status of the selected source allowing tallys to be triggered. The module provides streaming video and audio level metering so an operator can remotely and effectively monitor the signal path using Miranda’s iControl facility monitoring and control system.