| Digital Video Serializer & DV Encoder The award-winning DVC-100/120 SD to DV interfaces offer easy upgrading of conventional, tape-based SONY and Panasonic cameras to drive-based cameras for faster conventional and on-location news production.The interfaces offer high quality SD to DV conversion, and this allows tape-based cameras to record using a DV drive, with the DVC-100/120 interface mounted in between the drive and the camera.By eliminating slow tape transfer, news production can be streamlined significantly. The interfaces can be used for on-location recording, editing, and file transmission, as well as for local news production, with the drive transferred to the newsroom for subsequent editing and playout.The DVC-100 operates with SONY IMX, SX and DigiBeta cameras, and the DVC-120 operates with Panasonic and other SD cameras. The interface converts the Digital Parallel video out to DV, Composite, and SDI at the same time.The DV signal from the DVC-100/120 includes video, audio, time code and Metadata. The interface provides built-in markers, with a Safety Zone, and Center Mark generator. | FEATURES |
- Interface allowsupgrading of tape-based SD cameras to drive based cameras for improvedworkflow-DV output allows connection to a laptop or DV recorder/editorfor rough cut editing
- Operates withSONY and Panasonic SD cameras
- Provides SDI,Composite and DV outputs
- DV output can beconnected to a DV drive or laptop for rough-cut
|
|
- DV and SD outputsfeature embedded audio and time code
- DV drive isslaved to camera
- DV loopback toallow reviewing and approval
- Ultra-compact,camera mounted design
|
| SPECIFICATIONS |
INPUT
SD SIGNAL: 10-bit YPbPr SD as perCA701/CA702 Sony Interface CONNECTOR: 40-pin camera connector, asper Digital Betacam, Betacam SX and IMX Digital Camcorders series
AES1 (1/2)
CONNECTOR: 40-pin camera connector, asper Digital Betacam, Betacam SX and IMX Digital Camcorders series SDI SIGNAL: 4:2:2 SMPTE 259M-C, SMPTE272M-A (20-bit 48K synchronous audio) RETURN LOSS: > 15 dB up to 270 MHz CABLE LENGTH: 100 meters (1694) CONNECTOR: 75 ? BNC
AES2 (3/4)
SIGNAL: AES3, 20-bit LEVEL: 0.4 to 7.0 Vp-p (32KHz- 96KHz) IMPEDANCE: 110 ? balanced CONNECTOR: XLR-3F LTC SIGNAL: SMPTE 12M LEVEL: 0.6 to 5 Vp-p IMPEDANCE: > 10 k? CONNECTOR: 75 ? BNC AUDIO LTC SIGNAL: SMPTE 12M LEVEL: 0.6 to 5 Vp-p IMPEDANCE: > 10 k? CONNECTOR: 75 ? BNC
OUTPUT
SDI SIGNAL (2): 4:2:2 SMPTE 259M-C,SMPTE 272M- A (20-bit 48K synchronous audio) RETURN LOSS: > 15 dB up to 270 MHz JITTER: < 0.2 UI p-p CONNECTOR: 75 ? BNC
|
COMPOSITE
SIGNAL: NTSC (525/60) SMPTE 170M, PAL(625/50) ITU RT 470 RETURN LOSS: > 20 dB up to 5.75 MHz SNR: < -58 dB to 5.75 MHz(unweighted) CONNECTOR: 75 ? BNC Y SIGNAL: Luminance only (525/60 or625/50) RETURN LOSS: > 20 dB up to 5.75 MHz SNR: < -58 dB to 5.75 MHz CONNECTOR: 75 ? BNC DV SIGNAL: DV on IEEE-1394a CONNECTOR: IEEE-1394 6 pin AUDIO SIGNAL: Stereo unbalanced line out LEVEL: 1.0 Vp-p at 0dBFS IMPEDANCE: < 600 W SNR: > 70 dB Ref 0 dBFS (a weighted) CONNECTOR: Hirose HR-10 6 pins
AES2 (3/4)
CONNECTOR: 40-pin camera connector, asper Digital Betacam, Betacam SX and IMX Digital Camcorders series
OTHERS
TELEMETRY SIGNAL: RS-232 for telemetrymetadata, and Control data, 38.4 Kbauds CONNECTOR: DE-9P
PROCESSING PERFORMANCE
VIDEO SIGNAL PATH: 10-bit SD SDI, 8-bitCOMPOSITE, 8-bit DV AUDIO SIGNAL PATH: 20-bit SD SDI, 20-bitAES, 16-bit DV (48 KHz)
DV COMPRESSION: DV format at 25 Mbps as per DV Blue Book, and DVCPRO25 DV: 4:1:1in NTSC, 4:2:0 in PAL DVCPRO25: 4:1:1 in NTSC, 4:1:1 in PAL
POWER POWER INPUT: 11 – 17 VDC CONNECTOR: XLR-4, and Battery connector "IDX" or "Anton Bauer" or"PAG" POWER: 5 Watts Max TEMP. RANGE: 0-40°C
|
| ORDERING INFO | Digital Video Serializer and DV Encoder for Digital SonyCamcordersDVC-100-ANTON DVC-100/Anton Bauer battery adapter DVC-100-IDX DVC-100/Sony battery adapterDVC-100-PAG DVC-100/PAG battery adapter DV Encoder for Digital Panasonic and other SD DigitalCameras DVC-120-ANTON DVC-100/Anton Bauer battery adapterDVC-120-IDX DVC-100/Sony battery adapter DVC-120-PAG DVC-100/PAG battery adapterDVC-Dock Base for DVC-100/120 with built-in power supply |
|