For-A Mighty Coder D/A

MightyCoder d/a Compact serial digital component to analog converter which is a cost saving answer to integrating existing analog monitors in facilities switching over to digital support. MightyCoder power supply frame and module options also let up to 20 converters be connected to, and powered by, a single EIA 1RU frame. Accepts 1 ea. serial digital component input.Outputs composite, component, and reclocked serial digital (input) simultaneously.Selectable digital filters and built-in color bar generator.Signal presence and power indications.Sized small enough to fit in almost any space.Attention: The input signals below don't convert into correct output signals.Digital component signals corresponding to 8ch embedded audio signals.Digital component signals which embedded audio corresponds to 24-bit resolutionDigital component signals come out from IMX (SONY).

Specifications Standard NTSC, PAL, or PAL - M(selectable by Internal dip switch) Inputs Serial digital component,1ea., BNC (w/2ea., active loopthrough) Outputs Selectable as below Analog composite 1.0Vp-p, 75?, BNC Y/C Y: 1.0Vp-p, C: 0.286Vp-p(NTSC) / 0.3Vp-p (PAL), 75?, BNC GBR G/B/R: 1.0Vp-p (0.7/0.3)(Selectable sync ON/OFF), 75?, BNC YUV Y: 1.0Vp-p, U/V: 0.7Vp-p(BETACAM level), 75?, BNC DG / DP 1.5% / 1.5¼(composite), 2.0% /2.0¼ (component) S/N Ratio Better than 52dB Output DC Blanking Level 334mV typical (composite),668mV typical (component Pb /Ph) Chroma to Luma DelayInequality 10ns typical Filter Response (-3dB bandwidth) Low Pass Y = 4.2MHz, PBPR = 2.05MHz Notch Y = 2.1MHz, PBPR = 2.05MHz High Band Y = 5.6MHz, PBPR = 2.05MHz Temperature / Humidity 10ºC - 40ºC / 30% -90% (no condensation) Power / Consumption 6VDC / Approx. 4VA Dimensions 115 (W) x 32 (H) x 76 (D) mm Weight Approx. 0.25kg (w/o powersupply) Accessories Operation manual Options MC-PS-FR: Power module frame.Accepts up to 4 modules (MC-PS-5). MC-PS-5: Power module. Powers up to 5 MightyCoders.